The Best Ways To Cut Down a tree

Cutting a tree is a challenging task because you need to take care of a lot of things. But it is not even a tricky undertaking. You only need the right equipment in order to get things done correctly. Other than this, there are a few precautions you need to take care of. Tree service in Hedgesville WV is available if you're still not convinced. Let us handle the process for you. Here is a straightforward step to step guide for tree cutting. 

Gather all equipment 

The foremost thing you need to plan out is the different equipment required to cut a tree. Here is a complete list you may need:

• Safety glasses
• Hearing protection
• Work gloves
• A chainsaw
• A hard hat
• Felling wedges

You may need all such things, and even the permit depends on the locality in which you are living. 

Check the fall

After gathering all equipment, you need to estimate the altitude of the tree and determine where it may fall. It can be easily regarded from a far distance. Check from top to bottom where the tree will fall. Even make sure you have a safe place to retreat from the area. 

Plan and cut the notch 

The notch is a part that will allow a tree to fall appropriately. You have to cut at a comfortable working height. Start with the top cut and move downward at a 45-degree angle. Cut about 1/3 of the way into the trunk below that. This horizontal cut should meet the first cut close to the bottom cut.

Insert wedges 

Wedges are necessary to take a tree down. The wedges will prevent your saw from getting pinched if the tree's diameter exceeds 18 inches. Once you have cut the notch, begin with the felling cut. Now insert the wedges and stop cutting and pound in the wedges. 

Make the tree fall 

It will make your tree fall. Now move to the opposite side of the tree and start cutting from the back. Once the tree starts falling, stop cutting there and take a few steps back as a safety concern.

Remove all branches 

"Linging" is the process that comes after the tree has been cut down. It implies that you cut the branches free of the tree trunk. Then, "buck" the tree by cutting it into 16-inch portions. To finish the cut without contacting the ground, roll the trunk after you have cut about three-quarters of the way through.

Conclusion 

These are some of the steps you need to take care of while cutting a tree. There ate multiple precautions and equipment required to entirely cut down the trees. You need professional help to successfully cut all the trees. Maintaining proper safety concerns is not a straightforward task. Hiring a professional Tree Service in Hedgesville WV can do wonders. Patriot Tree Service is the right company to consult. Call us at 304-207-0115 to know more.